You don't have to be a competitive cyclist to enjoy the benefits of group rides. Utilized correctly, regular group sessions can motivate you, improve your fitness and make any ride more enjoyable. However, if you lack the technique or the fitness to ride with a group, the experience can be frustrating and leave you riding alone. In a worst-case scenario, lack of skills causes you to crash, perhaps taking others down with you.
To help you get started, let's look at a few group ride basics.
Finding the Right Group for You
When you search for a group to ride with, find out their general policies. Some meet for "no-drop" rides. This means that no rider is left behind, and you can count on an experienced rider to stay with you. Inquire if someone in the organization teaches group riding etiquette.
Another option is to join a drop-in ride. These often begin in the parking lot of a local bike shop, with the pace of the group determined by the individuals or specific goals of the ride. Often, there are designated A, B and C groups to accommodate differences in riding speed.
The third most common choice is a race thinly disguised as a group ride. These are usually the fastest and most aggressive rides available. These rides are for very experienced cyclists and carry catchy names like, "Everyone Gets Dropped", "Ride Till You Puke" and "Wednesday World Championships." You have been officially warned just by reading the title.
Your local bike shop is a good place to start if you're looking for a group ride in your area. Most are associated with a club, bike shop or racing team.
Basic Skills
A few basic skills are needed to successfully ride with any group. You must be capable of riding a straight line, controlling your speed, anticipating possible problems and watching the road ahead of you. At the same time, be alert for activity in your peripheral vision.
Hold Your Line
If you have watched a professional cycling race, you know that every rider needs to "hold a line." This means that cyclists need to be capable of riding a line parallel with the edge of the road.
Practice this skill by riding 12 to 24 inches to the right of the white shoulder line while trying to keep parallel with that line.
The Slipstream
Some group rides practice staying together as one large mass—more or less—with little movement among the group.
Other group rides incorporate pace lines—or some version thereof—into their sessions. In its most basic form, a pace line occurs when one rider pulls a line of other riders behind them. Each person follows the rider in front of them by staying within a few inches to a few feet of their leader's rear wheel. This area of least wind resistance is known as a slipstream.
Staying in the lead rider's slipstream is called drafting. Riders in the draft position save upwards of 30 percent of their energy compared to the lead rider. If you've ever had a chance to draft, you know that riding 20 miles per hour is significantly easier when you're following rather than leading. The difference is even more pronounced in a head wind.
Control Your Speed
The lead rider in a pace line can stay at the front for just a few seconds or for several minutes. When you join a group that is rotating the lead position and it is time for you to lead, resist pouring on the gas to show everyone how strong you are. A pace line is happiest when the pace is steady. Fast accelerations or jerky braking motions disrupt the line and can cause a crash.
Keep Eyes and Ears Open
The first person in the group can see clear road. Thus, they need to point out road hazards—as do the rest of the people in the line. Pointing out hazards and verbal communication skills are important. For this reason, do not use headphones in a group riding situation.
When you are following someone, avoid getting a visual fixation on their rear wheel. Look several feet ahead, keeping the distance between your front wheel and the rider ahead of you in your peripheral vision. Watch for road hazards as well as motion to either side of the pace line.
Listen for cars approaching from the rear. A rear-view mirror mounted on your helmet or glasses can be very helpful when watching for cars.
Maintain the pedaling motion of the other riders in your peripheral vision. Watch for sudden changes in cadence—this usually signals some sort of problem.
More: 15 Thoughts Cyclists Have While Out on a Ride
Anticipate problems
If you are riding in windy conditions or it is a hilly course, anticipate changes in the group or peloton. When the peloton changes directions, sometimes the weaker riders are no longer sheltered from the wind and they fall off the pace. The same is true for a hilly course. Riders that can usually stay with the group on flat roads can fall off the pace on a hill.
Get accustomed to watching for signs that a rider is struggling. This includes having difficulty finding the right gear, breathing like a steam engine or constantly looking over their shoulder.
You don't want to be stuck behind a struggling rider if you are feeling strong. Pay attention to the signals so you can maneuver yourself into a good position.
Practice
This column just scratched the surface of group riding skills. Once you master the basics, you should continue to hone your skills. A good resource on mass riding is Racing Tactics for Cyclists by Thomas Prehn even if you are not a competitive cyclist. Remember: In group rides, smart riders often have the advantage over strong riders.
READ THIS NEXT: 8 Cycling Hand Signals for Your Next Group Ride